HMI 3.6 fergana Program error

[+Roberto Oppedisano]

i bought an iot Harmon hmi 3.6 to upgrade my camaro from ios i successfully got rid of the theft lock thanks troy for his file  but when i try to program the calibrations i get "error Occurred FERGANA Programming "
i uploaded my log and my archive hopefully someone can help

ProgramLogRadio.Txt IOT UPGRADE.zip

[Danny6776]

file who collected the queue is not correct or something queue 

Downloading CAL File:  84767753.BIN after this file is not correct

[+Roberto Oppedisano]

84767753 is the last file and it’s for the equalizer 

[+Lyubomir Krastanov]

What been original multimedia and what is target? VIN use for upgrade? Many more questions as RPOs, ect.

[KZV]

 

compile the archive correctly

[KZV]

look at which file programming starts with

[+Roberto Oppedisano]

1 hour ago, KZV said:

look at which file programming starts with

It looks like it started with the hybrid and not radio how can I fix this in

[+Roberto Oppedisano]

to anyone following I PM Troy and he suggested I use an older Version of DPS which fixed my issue thanks for all the suggestions 

[KZV]

your problem is not with the DPS version
the problem is an incorrectly assembled archive
this is how your archive is compiled
Below is how it should be assembled
the software file is not rewritten in this procedure
archive must start with ID 2

[KZV]

In addition, the block must first be updated from a flash drive
and only then replace the calibrations
otherwise you can get a brick
if the software does not match the calibrations

[KZV]

DPS version could influence
only if it doesn't count 5 bytes
SEED/KEY

 

[+codebuilder]

16 hours ago, Roberto Oppedisano said:

to anyone following I PM Troy and he suggested I use an older Version of DPS which fixed my issue thanks for all the suggestions 

A friend and I had issues with that 4.48 version doing the same thing with other modules too.  I've stopped using it, no issues with 4.46 and 4.53.

 

[+Roberto Oppedisano]

4 hours ago, KZV said:

your problem is not with the DPS version
the problem is an incorrectly assembled archive
this is how your archive is compiled
Below is how it should be assembled
the software file is not rewritten in this procedure
archive must start with ID 2

yea i realized i didt change the mod.id after posting but then i was having issues with GM seed Key

[+Roberto Oppedisano]

3 hours ago, KZV said:

DPS version could influence
only if it doesn't count 5 bytes
SEED/KEY

 

this is what i was having issues with after learning i messed up the archive