HMI 2.5 Firmware file, 84156714 / includes android auto and Apple CarPlay

Thank you TROY for that download and your work.

Is there a procedure on creating the usb stick? or just copy over the files to the usb stick and run the updated firmware?

On 3/15/2022 at 12:41 AM, shock007 said:

Is there a procedure on creating the usb stick? or just copy over the files to the usb stick and run the updated firmware?

Extract the files onto any reputable USB memory stick then place the memory sick into the car's USB port and follow the onscreen instructions.

Awesome thank you!

On 5/18/2022 at 5:15 AM, Lyubomir Krastanov said:

@Troy they definately will get Device calibration screen. So is good to be prepared with SPS session or someone to source them dps pack to recalibrate hmi.

Hi @troy,T hats exactly what i got. device calibration. I manage to get vin correct. I got both dumps. Before update and after. I got j2534. Would you be able to help?

31 minutes ago, Paulius Tilvikas said:

Hi @troy,T hats exactly what i got. device calibration. I manage to get vin correct. I got both dumps. Before update and after. I got j2534. Would you be able to help?

"Dumps" do you mean calibration files?

With the error, "device calibration" you will have to use sps with a VIN that came with HMI2.5 module. depending on your car's specs you can use these files below to create a dps archive file to program the HMI and get it up and running again.

This file is for Vauxhall branding no touchpad and no reverse camera.

Here are some other HMI files I think they are Opel branding.

I did read it with vvdi prog on bench :) I got d-flash, p-flash and opbt0 dump files. Im not sure how to load calibration files using dps.

I don't know about the flash files.

Here is tutorial for how to get and create the DPS archive for the modules.

Hi, Troy,

First, thank you for all the knowledge that you share with us. Very interesting, important & instructive.

Now, please, could you help me with an issue?

- I replaced the hmi 2.0 with a 2.5 unit. After VIN relearn works OK.

- I updated silverbox with android variant. Works OK

- I installed the software with Android from the page. Now, on calibration I tried to use the file from the page insignia 2016 HMI, but also others. All the time in DPS I have an error.

Do you have any ideea what can be? 

I load the log from DPS

Thank you. 

ProgramLog.Txt

Hello,

I have a 2016 model Opel Insignia. My car has a rear camera. There is Carplay but no AndroidAuto. I want to update software for setup AndroidAuto, but I don't have any OBD device, so I don't know how to do things. Is it enough for me to transfer your files to USB and update? If I receive a Calibration warning after the update, what action will I have to take? If you can help with the file, I can share the VIN number of my vehicle with you. Thank you.

You need a diagnostic interface. 

3 hours ago, Troy said:

You need a diagnostic interface. 

I think if this apparatus is necessary I can find it. Well, what kind of action will I have to take at this time, can you inform me about the process? I think there are many people like me who want to do this but do not fully understand the subject. Thank you for your support

11 minutes ago, yusuftolga said:

I think if this apparatus is necessary I can find it. Well, what kind of action will I have to take at this time, can you inform me about the process? I think there are many people like me who want to do this but do not fully understand the subject. Thank you for your support

Before using dps you need to have some experience using gm sps and a diagnostic interface. You can find more info on using gm sps service and a diagnostic interface on YouTube and other places. 

1 minute ago, LLCasaol said:

HMI 2.5 Firmware file, 84156714 / includes android auto and Apple CarPlay

Does it works on Cadillac CT6 2017

Yes the firmware will install on all HMI 2.5 module. A 2017 HMI 2.5 should already have the latest firmware already installed.

hello

1 hour ago, SUXROB HUSENOV said:

Here's how to install this radio block, Malibu 2 car, do I need to write the vin code

 

 

 

 

 

Hi, you can use DPS and this file to change the VIN in that HMI module.

I have a 2017 Chevy Volt Premier with an HMI that is stuck in 'Waiting for Update Media'. I have downloaded the files onto a USB drive but no update is occurring. My HMI # is 84028492. Are the downloaded files compatible?

2 hours ago, LLCasaol said:

go to SPS, on programming, select USB File Transfer. or reprogram HMI...

 

I am way past that option. The HMI has lost communication with SPS so I cannot do the file transfer doing the traditional recovery. I was hoping these files posted here would allow me to get the HMI running again so that I could update with my vehicle specific calibrations.

Thanks!