Jump to content

Welcome To CameraLoops

Take a moment to join and become a member

GM Seed Key Generator Tool

$300

   (0 reviews)

1 Screenshot

About This File

I am pleased to announce the release of the GM seed key generator tool. A tool created by the original developer zpx

This tool can be used to generate the seed key for all GM 5-Byte and 2-Byte seed electronic modules.

Note: You must input the module's seed and security algorithm code into the seed key generator tool to generate the correct seed key.

The included "Read Me! Instructions.pdf" demonstrates how to know a module's algorithm code. You can use the GM DPS tool to know the module's seed.

A useful tool for advanced users who want to manually send commands to the modules. 

Note: This tool is for advanced users. I do not offer any form of support regarding figuring out your module's seed and algorithm. Do not message me asking, as I will not reply.

 

This tool is locked to the PC hardware ID 

After purchasing, you must install the tool and send a private message, including your PC hardware ID to @Troy  to receive your activation key.

 

How to receive your activation code.

  1. Download the tool from the downloads section.
  2. Extract the "GM Seed Key Generator.zip" to your PC desktop.
  3. Open the PDF file "Read Me! Instructions.pdf", read its content and follow the instructions.

 

 

GM Seed Key Generator

image.gif

 


Other Files from Troy


User Feedback

Recommended Comments

  • Contributors

Hi Troy

How can I get past the virus protection? Virus detected. Should I install it on windows7? thanks

Link to comment
Share on other sites

  • Contributors
Lyubomir Krastanov

Posted

Stop antivirus during installation and include program files folder in exclusion

Link to comment
Share on other sites

  • Contributors

Ok thanks Lyubomir.

So I have another question. Gm uses 256 different algo's. How do I find out the algo that I need to use  for different modules? This seems like I need another program. lol

Thanks Dom

Link to comment
Share on other sites

  • Contributors
Lyubomir Krastanov

Posted

That info should be provided by developer or you need to know which module what algo use or so. I’m far from this. Doing simple things. @Troy may can give more light 

Link to comment
Share on other sites

On 8/17/2023 at 8:00 PM, domdel said:

Ok thanks Lyubomir.

So I have another question. Gm uses 256 different algo's. How do I find out the algo that I need to use  for different modules? This seems like I need another program. lol

Thanks Dom

 

Hi, re-download the file and read the "Read Me! Instructions.pdf". I now include a tutorial demonstrating how to know the module's algorithm code.

  • Like 1
Link to comment
Share on other sites

  • Contributors

hello

 

I try now 
The result comes with me
gm 5-byte Security 0000000000

The number 0000000000 is not accepted by DPS and also in SPS2

DPS3.png.5212513471a30750c7f0a6e2283df45b.png

 

DPS1.png.52f2653c0751c026c5290e4a0814c5fe.png

 

DPS2.png.2bb1146d4ea4de46d243894835a4421c.png


Is there a solution to this problem

Thank you

 

Link to comment
Share on other sites

  • Contributors
34 minutes ago, zpx said:

this is  a bug  I am trying to fix it

Great 👍🏼 

 

good luck 

thanks

Link to comment
Share on other sites

  • Contributors
On 9/7/2023 at 12:41 PM, zpx said:

this is  a bug  I am trying to fix it

@zpx hi any update 

 

thanks

 

Link to comment
Share on other sites

Eduardo de Freitas Topedo

Posted

hi troy . This costs $150, how long does the calculator stay active on my PC?

Link to comment
Share on other sites

2 minutes ago, Eduardo de Freitas Topedo said:

hi troy . This costs $150, how long does the calculator stay active on my PC?

 

Hi, it stays active for as long as you have that same PC. 

Link to comment
Share on other sites

  • Contributors

Hello does this tool help fix this problem in the picture, programing fails at 100%.  If this tool make programming succeed, I buy right away.  Thanks.

Screenshot (7)df.png

Link to comment
Share on other sites

On 11/8/2023 at 6:55 AM, med458 said:

Hello does this tool help fix this problem in the picture, programing fails at 100%.  If this tool make programming succeed, I buy right away.  Thanks.

Screenshot (7)df.png

 

I don't know if the tool will fix that issue.

Usually, when DPS "Percentage Complete" states 100%, the module is fully programmed and will work fine even if there's an error popup. I have that same issue when programming my insignia ECM. The car always works fine with that error popup. 

  • Like 1
Link to comment
Share on other sites

  • Contributors
codebuilder

Posted

On 11/7/2023 at 11:55 PM, med458 said:

Hello does this tool help fix this problem in the picture, programing fails at 100%.  If this tool make programming succeed, I buy right away.  Thanks.

Screenshot (7)df.png

Ignore it, if you look at your screenshot, it's failing on 00 00 02 51 AE 7E 80.., it's an attempt to perform an unlock.  There's no code entered so it's sending FF FF FF FF.  Obviously the module responded and said "this is invalid".  The entire script would have ran and you can ignore this.  There's probably not much more after in that utility anyways.  If you'd like, post the utility file here and I'll have a quick look at it but chances are, all of the work is complete.

 

  • Like 1
  • Thumbs Up 1
Link to comment
Share on other sites

17 hours ago, codebuilder said:

Ignore it, if you look at your screenshot, it's failing on 00 00 02 51 AE 7E 80.., it's an attempt to perform an unlock.  There's no code entered so it's sending FF FF FF FF.  Obviously the module responded and said "this is invalid".  The entire script would have ran and you can ignore this.  There's probably not much more after in that utility anyways.  If you'd like, post the utility file here and I'll have a quick look at it but chances are, all of the work is complete.

 

 

Thanks for the info @codebuilder. Great tip👍

  • Like 1
Link to comment
Share on other sites

  • Contributors
On 11/9/2023 at 11:42 PM, codebuilder said:

Ignore it, if you look at your screenshot, it's failing on 00 00 02 51 AE 7E 80.., it's an attempt to perform an unlock.  There's no code entered so it's sending FF FF FF FF.  Obviously the module responded and said "this is invalid".  The entire script would have ran and you can ignore this.  There's probably not much more after in that utility anyways.  If you'd like, post the utility file here and I'll have a quick look at it but chances are, all of the work is complete.

 

thats correct. the hvac (and other modules) in last step, need the pin, if you dont check the box and put the pin, it fails at 100% but the calibrations are written OK.

  • Like 1
Link to comment
Share on other sites

  • Contributors

Thanks guys, I do see it is programmed but GDS2 reports that it keeps the old VIN.  I try to change VIN in DPS as Troy's video shows, putting new VIN in "Get Controller Info".  But old VIN stays.  Maybe that last step that fails is the new VIN write?

Link to comment
Share on other sites

  • Contributors

Also I like having new tools to help me do things, but I don't fully understand where I type seed key and how it helps me if I type it?  Thank you guys.

Link to comment
Share on other sites

  • Contributors
codebuilder

Posted

12 hours ago, med458 said:

Thanks guys, I do see it is programmed but GDS2 reports that it keeps the old VIN.  I try to change VIN in DPS as Troy's video shows, putting new VIN in "Get Controller Info".  But old VIN stays.  Maybe that last step that fails is the new VIN write?

Are you using Troy's tool to change the VIN (can't remember if he has an HVAC one) or are you trying to use the main calibration utility?  If you're trying to use the main calibration utility....  it's probably not going to do it.  Again, if you can, post it here and I'll take a look.  I don't have any for HVAC, could download one maybe tomorrow or the next day and take a look.  It's easier for me if you put it here though 🙂 

Link to comment
Share on other sites

  • Contributors
12 hours ago, codebuilder said:

Are you using Troy's tool to change the VIN (can't remember if he has an HVAC one) or are you trying to use the main calibration utility?  If you're trying to use the main calibration utility....  it's probably not going to do it.  Again, if you can, post it here and I'll take a look.  I don't have any for HVAC, could download one maybe tomorrow or the next day and take a look.  It's easier for me if you put it here though 🙂 

No I wasn't using Troy's utility, I always thought Troy's files are just SPS and he posts files to help people without SPS.  I have SPS and I bought the utility to make DPS calibrations so I thought when I make a calibration zip with the utility I am making the same thing as Troy's utility.  I guess I am wrong.  I can put the calibration I created with the utility here.

15_Malibu_HVAC_13595108.zip

Link to comment
Share on other sites

  • Contributors

A long long time ago, I don't even remember doing it, I buy Troy's HVAC tool.  I just tested it and you are right, it works when the SPS does not work.  Its amazing what he does.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...