Jump to content

Welcome To CameraLoops

Take a moment to join and become a member

DPS 4.48

   (0 reviews)

1 Screenshot

About This File

GM development programming system 

DPS 4.48

DPS 4.46 is the best version.

 

Screenshot 2022-02-25 at 9.34.23 pm.png

 
 
  • Love-it 1

Other Files from Troy


User Feedback

Recommended Comments



1 minute ago, Ernestas said:

Any changes from the last version Troy?

Hi, minor changes with nothing substantial.

 

Development Programming System (DPS)

____________________________________________________________________________________________________________
DPS Release Version 4.48.0000

(1)        Added new set MEC to 0 archives for VIP.

(2)     Added new erase SBAT DID F0F8 bin file.

(3)     License verification enhancements.

(4)        Added new help links, new Get Status window to interrogate DPS system status.

(5)        Minor bugfixes.

____________________________________________________________________________________________________________
DPS Release Version 4.47.0000

(1)        Changed RID 020E payload from FF 00 00 to FF FF FF.

(2)     Added new PEC errors.

(3)     Interpreter enhancements.

____________________________________________________________________________________________________________
DPS Release Version 4.46.6000

(1)        Changed GEM and Global B “Protocol and Communication Settings” to include selections for with and without Gateway.
        Partial Network Wakeup messages will only be sent out when the user selection indicates that there is No Gateway.
              
(2)        For Global B communications on a vehicle 'with a Gateway' (CGM), DPS will could wait up to 20 seconds for ECUs to wake up.
        During the wait, the mapping matrix may be rebuilt 3 times until conditions are optimal.

(3)     Inclusion of support for Global B DoIP with respect to Sequential Programming.

(4)     Inclusion of support for Global B DoIP with respect to SuperSession Table (SST) programming.

(5)     Key Provisioning: Eliminated superfluous Extended Diagnostic Session request (10 03) prior to writing ECU slot data to reduce the amount of IECS server requests.

(6)     UDS Op Code 01 – Inclusion of Ethernet Routing Subnet setting via AC2 parameter (DoIP).  

(7)     Sequential Programming will continue on even if one of the sequenced events fails.

(8)     Miscellaneous other updates:
         - Minor UI changes.
         - Changed certain timing parameters to encourage successful communication.
         - Added very small delay around tester present messages for Class 2 protocol.
         - Fixed a minor bug in the UART interpreter.
         - Minor enhancements to the GMLAN interpreter.
         - (Type4 Developers) Fixed a bug in which spawning a Type 4 could result in an incorrect CAN FD variant.
         - Attempting to unlock a GMLAN ECU via the DVT security Levels 03/04 in DPS will result in a fatal error. DPS does not support DVT Unlock.
         - DIMSUM UDS, change m_P2cTimeout from 150ms to 500ms (stability).

____________________________________________________________________________________________________________
DPS Release Version 4.45.3000

(1)     Added new certificate search criteria for certificate installation notifications.

____________________________________________________________________________________________________________
DPS Release Version 4.45.2000

(1)     Fixed a bug causing dubious results during super session events.

____________________________________________________________________________________________________________
DPS Release Version 4.45.1000

(1)     Fixed a bug causing 5-byte unlock to fail for new DPS users.

____________________________________________________________________________________________________________
DPS Release Version 4.45.0000

(1)     Fixed a 5-byte security DLL reference issue with GMLAN protocol (Get Controller Info).

(2)     Created new license and certificate installation process.

(3)     Data log file updates for GM UDS Unlock and Key Provisioning IECS functionality.

(4)     Modified Key Provisioning logic to support ECUs that have uninitialized KP slots.

(5)     OpCode updates based on the current (2019) Interpreters (utility file) document: GM UDS OpCodes $2E, $31 and $02 (new).  Common OpCode $60 (placeholder).

(6)     Add support for reading (Get Controller Info) and writing (ECU Bypass Ticket) for SBAT Installer GM UDS DID $F0F8.

____________________________________________________________________________________________________________
DPS Release Version 4.44.0000

(1)     Upgraded the DPS build environment.

(2)     Improved new version checking.

(3)     Minor bug fixes.
____________________________________________________________________________________________________________
DPS Release Version 4.42.4000

(1)     Ethernet stack J2534 TxDone indication Handling is not correct

(2)     Wake-up Ethernet sub nets RID $020E with 0xFF
____________________________________________________________________________________________________________
DPS Release Version 4.42.1000

(1)     Fixed a DPS problem where DPS was not setting the "CAN_ID_BOTH" flag when calling the J2534 PassThruConnect function.

(2)     DPS (4.42) was recently changed to support sending 11-bit CANID (network management) messages in addition to 29-bit CANID messages when the CGM is not identified on the link.

(3)     A few J2534 tools did not have a problem with DPS not setting this flag (default is "both"); however, other tools do require DPS to set this flag appropriately.
____________________________________________________________________________________________________________
DPS Release Version 4.42.0000

(1)     Ethernet - Added support for IPv6

(2)     Ethernet - Added Vehicle Selection Pop-up when connected using infrastructure mode (The Vehicle is on a NETWORK)

(3)     J2534 Passthru - Corrected Error Code Descriptions

(4)     Updated DPS Help Information to be more current

(5)     Added a feature to periodically check the DPS portal for new DPS releases

(6)     Bug Fix - Clear Default Device Check box is hidden

(7)     Bug Fix - Resolved a communication problem when using CAN7 (pins 1/9) for the GM UDS protocol (GEM / Global B).

(8)     Bug Fix - Fix response processing issue with GM UDS (GEM / Global B) for the All Nodes $10 $01 request (DiagnosticSessionControl – defaultSession).

(9)     CAN/CANFD Network Management Wake-up - Added a featured to automatically send network management messages wake-up all Partial Networks. This feature is enabled if the CGM (Global B) or Firewall (GEM) are not detected on the network.

(10)    Key Provisioning - Executed RID 0x02C3 After a successful key write, to command the ECU to save the keys to permanent memory

(11)    Key Provisioning - Sorted the ECU provisioning list by diagnostic address prior to installing keys. (ascending order).  This change makes the execution sequence deterministic.

(12)    Key Provisioning - Added uniformity to error messages

(13)    Key Provisioning - When running in standalone mode,  the provisioning sequence no longer termainates for a No Reply or negative response error.

(14)    J2534 Passthru -  Changed "Device Not Supported" String to "Contact Device Manufacture for Technical Support"

(15)    Ethernet -  Support for Link Local IP Addresses
____________________________________________________________________________________________________________
DPS Release Version 4.41.1000

(1)     DPS - Release Notes are incorrect

(2)     DPS - IECS DLL Incorrect Version used in Build

(3)     DPS - Key Provisioning - No longer executing as designed

____________________________________________________________________________________________________________
DPS Release Version 4.41.0000

(1)     Add Supersession support for GB/GEM (UDS); CAN and CANFD.

(2)     Miscellaneous minor enhancements and software bug fixes

(3)     Integrate J2534 Wrapper into DPS

(4)     Get Controller Information over DoIP

(5)     Cleanup delivery file set

(6)     Get Controller Info - MEC Counter

(8)     Enhance Software Maintenance Utility Functionality

(9)     Remove support for J2534 versions prior to 0404

(10)    DPS GetControllerInfo(GCI) for GM UDS displays labels and editboxes for undefined DIDs.

(11)    Define requirements for a DLL for DPS (at runtime) to determine the latest released version.

(12)    DPS License Installer - File Path.

(13)    Registry 'OPTIONS' reinitialized to default values.

(14)    Windows Error closing GCI dialog.

(15)    Save Startup Default - Long J2534 Name.

(16)    DPS - DoIP support for SBAT Installation.

(17)    DPS - Key Provisioning over DoIP.

(18)    DPS Auto Repeat Mode / VIT2 Populated - Data Logging Problem.

Link to comment
Share on other sites

  • Contributors
Lyubomir Krastanov

Posted

is it cured better from 4.46 or is in same state

Link to comment
Share on other sites

This version cannot be programmed correctly. Because it doesn't return the correct key, please confirm with Troy. thanks

 

1.png.d401217719ffb3c14ff9a79c29547a1a.png

 

 

2.png.5e017f5ac260cc43409bdaa901e5114c.png

Link to comment
Share on other sites

7 hours ago, deng said:

This version cannot be programmed correctly. Because it doesn't return the correct key, please confirm with Troy. thanks

 

1.png.d401217719ffb3c14ff9a79c29547a1a.png

 

 

2.png.5e017f5ac260cc43409bdaa901e5114c.png

 

DPS was not cracked by me. I don't have a 5 byte seed module to check, DPS 4.48 generates the 2 byte keys correctly.

 

Re-download the DPS 4.48 file once more, install it and check. Let me know if it still doesn't generate 5 byte keys.

I read that 5 byte keys are generated via GM server, the cracked DPS has no access to GM server.

Link to comment
Share on other sites

8 hours ago, Lyubomir Krastanov said:

is it cured better from 4.46 or is in same state

 

DPS 4.48 has updated for later cars, otherwise 4.46 works very well.

Link to comment
Share on other sites

On 5/12/2022 at 8:15 PM, Troy said:

 

DPS was not cracked by me. I don't have a 5 byte seed module to check, DPS 4.48 generates the 2 byte keys correctly.

 

Re-download the DPS 4.48 file once more, install it and check. Let me know if it still doesn't generate 5 byte keys.

I read that 5 byte keys are generated via GM server, the cracked DPS has no access to GM server.

 

 

I test other version, 4.46 works very well.  Good Job!

Link to comment
Share on other sites

Adam Alkofe

Posted

Hi, i just bought this DPS but its not working its asking me for license does not match this computer i pressed ok the no but it wont open. please help thank you 

IMG_2002.jpg

IMG_2003.jpg

Link to comment
Share on other sites

Adam Alkofe

Posted

Hi, yes I did copy the crack-folder and paste it in C : DPS folder but still not working. Thanks 

Link to comment
Share on other sites

9 hours ago, Adam Alkofe said:

Hi, yes I did copy the crack-folder and paste it in C : DPS folder but still not working. Thanks 

Try installing on another machine. 

Link to comment
Share on other sites

Adam Alkofe

Posted

3 hours ago, Troy said:

Try installing on another machine. 

Ok I will thanks 

Link to comment
Share on other sites

Is this feature used for writing new vin ( Added new set MEC to 0 archives for VIP)

Link to comment
Share on other sites

New to programming, trying to program my used electric powersteering module into 2014 chevy equinox. The dealer could not do it. i think this is step 1

Link to comment
Share on other sites

  • Contributors
QUSAY OSMAN

Posted

Hi troy 

This is the second bcm i try to reprogram it by DPS but the program is failure and after that no communication with the bcm and the car is don't start I think the bcm is dead after that.

Whay this is happening to me 

IMG_20230608_105515.jpg

Link to comment
Share on other sites

27 minutes ago, QUSAY OSMAN said:

Hi troy 

This is the second bcm i try to reprogram it by DPS but the program is failure and after that no communication with the bcm and the car is don't start I think the bcm is dead after that.

Whay this is happening to me 

IMG_20230608_105515.jpg


Post the DPS log .TXT file for the error.

image.png

 

Link to comment
Share on other sites

Your log has no programming information in it. I don’t know what’s the issue, however delete dps 4.48 and install dps 4.46 maybe that will work. 

Link to comment
Share on other sites

  • Contributors
Arbe_gtc

Posted

this log its from "Get Controller Info Session" not from Programm option

Link to comment
Share on other sites

  • Contributors
QUSAY OSMAN

Posted

On 6/8/2023 at 4:28 PM, Troy said:

Your log has no programming information in it. I don’t know what’s the issue, however delete dps 4.48 and install dps 4.46 maybe that will work. 

 

I am sorry for the late reply. I had some circumstances beyond my control.... After I installed the DPS 4.46, I try to open the program, but I get an error message saying license that it must be installed, noting that I copied the three hacked files

5555566567777.PNG

Link to comment
Share on other sites

46 minutes ago, QUSAY OSMAN said:

 

I am sorry for the late reply. I had some circumstances beyond my control.... After I installed the DPS 4.46, I try to open the program, but I get an error message saying license that it must be installed, noting that I copied the three hacked files

5555566567777.PNG

 

After applying the DPS crack files, click OK, Dps should load.

Link to comment
Share on other sites

This version of DPS works fine.

You must be doing something wrong.

Use the control panel to delete DPS from your PC. Then go to  Drive :C and delete the DPS folder.

 

DPS 4.46 install instructions.

1. Unpack the DPS 4.46 downloaded file.

2. Install apps_installer_v4_46_6000. msi

3. Copy and paste all 3 files from the crack folder into the DPS installed directory which is Drive C:DPS
4. When dps opens, on the popup tab click OK.

Link to comment
Share on other sites

  • Contributors

السلام عليكم ممكن رقم الهاتف

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...