GM HMI 2.5 Activate Video In Motion, SAT-NAV In Motion, Track-Pad, Rear Camera And Climate Control using GM DPS

Impressive.

7 hours ago, Arbe_gtc said:

Hi!

 

Think possible to add this RPO Option? (C70) from Camaro?

https://www.youtube.com/watch?v=kjF8rbQqwbo

Need an Control module conected to the BCM (3 wires, X1 Pin 17, X6 pin 26 and X1 pin 23) and calibrations for the HMI to enable the menú.

24 colours of ambient light managed form the HMI...

 

Example VIN: 1G1FJ1R65J0126255

I don't think that car with the LED option is using the HMI 2.5 module. I don't see any LED options in the HMI 2.5 module.

5 minutes ago, WWEILER said:

Is there any way to get a cal flash to turn the hyper flash off on a Silverado truck?

What is the hyper flash? Can you post a photo for the hyper flash icon showing on the hmi 2.5 screen. 

28 minutes ago, Arbe_gtc said:

Appears to be there are a aditional module between Display and HMI (84307902) Called Module Asm-Hmi Control Module Bypass. The HMI 2.5 of the corvette (and others), havn't navi integrated... Maybe this asm module enable the ambient light options in the screen.

I wouldn’t now as we don’t have those cars in the UK. 

Yep, lights are usually controlled by the BCM. 

I don’t have any knowledge about that option so I can’t help. Just speculating. You probably would need to find a vin that has that option, get the sps files for that vin then program the files to your BCM and see if it works. 

Troy, what gives the choice of parking lines in the photo? are both options active? I heard it's for a trailer..

5 minutes ago, Smash said:

Troy, what gives the choice of parking lines in the photo? are both options active? I heard it's for a trailer..

Yes both options are there. 
Yes you can use the lines to hook up a tow trailer. 
 

Is there a way to improve backup cameras video quality (replace with some better cam)?
Reverse camera in my Insignia is pretty low-res and too blurry.. Also, at night it is pretty useless, because it gets overexposed from glare from lights being reflected from various chrome parts around the boot..

I see yours is the same as mine, Troy..

1 hour ago, pupu14 said:

Is there a way to improve backup cameras video quality (replace with some better cam)?
Reverse camera in my Insignia is pretty low-res and too blurry.. Also, at night it is pretty useless, because it gets overexposed from glare from lights being reflected from various chrome parts around the boot..

I see yours is the same as mine, Troy..

Yes better camera is out there, I see those who retro fit RVC to the Insignia are using better quality camera. The issue is to find the source to purchase one of those RVC.

I want active the rear camera for IOR receiver 

My vin: KL1ZA5CS2KB114773

3 hours ago, Loading60 said:

I want active the rear camera for IOR receiver 

My vin: KL1ZA5CS2KB114773

 

Does the car uses HMI 2.5?

If so, I can add rear camera if you send me the HMI 2.5 calibration files in PM.

2 hours ago, Troy said:

 

Does the car uses HMI 2.5?

If so, I can add rear camera if you send me the HMI 2.5 calibration files in PM.

I don’t know 🤷‍♂️

No, this is HMI 3.0

3 hours ago, Troy said:

 

Does the car uses HMI 2.5?

If so, I can add rear camera if you send me the HMI 2.5 calibration files in PM.

3 hours ago, Loading60 said:

 

I don’t have a solution for hmi 3. 

Does anyone has a working hmi 3 on a bench setup?

31 minutes ago, Troy said:

Does anyone has a working hmi 3 on a bench setup?

 

 

Can I access the Liunx by obd, and active the rvc?